Discussion in 'Project Logs' started by Nolimited, 24 May 2008.
Nice mod, loving all the updates
looks very clean, i like it! keep up the good work
Very nice look to it! I really like the jacks passthrough, and the colors! nice cable management as well.
At 80% completion it's looking damn fine.
Any updates ?
Update Cable management
Thanks @ all for the nice comment
And now update Time
I have find cable that are not sleeve and first finish them and all in black
First i need to have some cable extensions and need to make it my self.
When done start sleeving first the cable
after the power connector again in black
Other cable that need to be done the Usb and FireWire i did only the cable
The audio cable for the musketeer same attention cable black
Also did the same with the temp sensor for the CPU
Other cable that are done the cable for the zalman CPU controler
I check the power cable for the hard disk to long and need to be change
after the change it will be better
Start fixing some cables and the CCFL lights.
the first cables and the first light on the rear of the case
The second light on the top inside the case
Mounted the white panel and test with the cables to see who it fit in the case
An other view
That's all for today next update soon
Your really getting there. The sleeving is finishing everything off nicely.
Thanks The boy 4rm oz i find also i try to do all the cable but not easy
Another week-end finish and a small update
I dismounted my CM musketeer because i will add blue transparent add the front of each controller
This is before i dismounted them
I remove all the cover and also remove the cover from each controller
I have test with flames but not good
I cut the blue transparent on the size of the controller cover
Here 1 controller cover
Here a picture from all the covers and the blue transparent
and with the light on
I finish to mounted all on the case and make a light test.
that's for the CM musketeer i love it but other idea are welcome
I make also a cover for the power supply because to many cables a visible and is not nice
First take some measure
and here the piece fixed and in placed
take another picture to size all
not so bat and this cutting all done with my Dremel 300
That's all for this week i will try more next week
nice job, btw, I have the same Dremel + workcase (treasure hunt, isn't it). Keep up the good work!!!
@ Jelle46 thanks yes this is the workcase i receive it from my woman
Looks like its coming together nicely
@MarkW7 Sorry for no update because to many work some company has virus outbreak and this take time to solved thanks man
Back for update
Sorry fo this slow update but work and other things needs to be done ;-) but lets start the update.
I have make some modification on the DVD cover because problem when open and close.
here you can see the modification
also make soms modification of the harddisk cage because the cable are blocked
Start remove all disk and check where i need to cut
Place where the cable need to go before
remove on the border for better contact off the sata cable after
The part paint
Now all insert and test the cables
Also make fixing system for the Bay cover i use the fixing screw from the motherboard
Fixed all on the side from the drive bay
Picture with the cover in placed and fixed.
I also install the cover beside the motherboard and place all the cable on the right place
I also finish the cables from the button's
Now i need to finish all the white covers and when finish i can install all and make some test like the lights and the fan's
Thanks for reading and happy modding
Cable management is simple outstanding, looks very nice.+rep
@ The boy 4rm oz thanks Man
Sorry for this slow update but i am back
i had to order a new harddisk for the data because the other not working like i want
I have now a 500Gb in sata2
Install and finish the cables management
I start finishing the white plexi this take min 2 hours for every plexi to remove all scratch
This part is to install of the side of the Power supply bay
On the Rear of the motherboard many cables it make my crazy
A lot of cables not easy to fixed all here you can see it without the plexi
And here with the plexi install
Here a general view from the case
Mounted the grill on the drive bay cover
I take picture with some light test with the most part install
The front off the case with the CM Musketeer, Zalman and the Hd leds
The side view without the lights on only the fan led of the rear fan and top fan
The top off the case with the fan started
Start the top and the botom leds inside the plexi
the front view with the bottom and top leds on
And now start the inside CCFL
other view off the case
Some other picture
Closer to the windows
Take some other picture
other view from the window
The rear view
The fan from the rear
And last picture from the lights on
That's all for today and Please vote for me
This has turned out very well indeed, the paint looks amazing and so does the cable management. Congratz on your MOTM nomination and good luck.
I came across this thanks to the MOTM thread and I am FLOORED.
Amazing mod, amazing paint, just an amazing job there!
I was planning a blue glow like this for my H2O-C7 project. I even tried a few things. Now I have determined that I SUCK!
This is just awesome. very nice balance between the top and the bottom.
I'll need to sign a "Do Not Compete" agreement.
+rep for the effect
Separate names with a comma.